HeatWave SuperQuiet® In Contra Costa County

HeatWave SuperQuiet® In Contra Costa County 2017-03-27T14:02:09+00:00

pool heater

Cost And Savings Calculator

 

50 Hz SQ120R SQ166R
Efficiency    
KW Output 25.8 31.7
BTU Output 88,000 108,000
Coefficient of Performance (C.O.P) 5.5 5.6
KW Input 4.7 5.7
Electrical    
Heat or Heat & Cool H & C H & C
Voltage/Hz/Phase

H – 200-240/50/1
D – 380-420/50/3
H & D D
Minimum Circuit Ampacity H – 38.9

D – 14.2

D – 16.2
Maximum Fuse Size H – 38.9

D – 14.2

D – 25
Refrigerant R410A R410A
Water Flow

A Heater Bypass Kit is required when flow rates exceed the maximum

   
Minimum/Maximum (m3/h) 6.8/15.9 6.8/15.9
Minimum/Maximum (gpm) 30/70 30/70
Physical    
Weight (kg) 115 149
Weight (lb) 253 328
Length x Width x Height (cm) 87 x 87 x 112 87 x 87 x 112
Length x Width x Height (in) 34″ x 34″ x 44″ 34″ x 34″ x 44″
Shipping    
Weight (kg) 143 177
Weight (lb) 315 390
Length x Width x Height (cm) 97 x 92 x 125 97 x 92 x 125
Length x Width x Height (in) 38″ x 36″ x 49″ 38″ x 36″ x 49″
60 Hz SQ120R SQ166R
BTUs
(water temp/ambient air/relative humidity)
   
80/80/80 110,000 126,000
80/80/63 103,000 120,000
80/50/63 72,000 82,000
Coefficient of Performance
(water temp/ambient air/relative humidity)
   
80/80/80 5.5 5.6
80/80/63 5.3 5.3
80/50/63 4.0 4.0
Refrigerant R410A R410A
Electrical    
Heat or Heat & Cool H & C H & C
kW Input 5.9 6.6
Voltage/Hz/Phase


A – 208-230/60/1
B – 200-230/60/3
E – 380-415/60/3
G – 460/60/3

A & B A, B, E & G
Maximum Fuse Size A – 60
B – 50
A – 60
B – 50
E – 30
G – 25
Minimum Circuit Ampacity A – 38.5
B – 31.0
A – 42.1
B – 33.3
E – 18.4
G – 16.2
Water Flow
*A Heater Bypass Kit is required when flow rates exceed the maximum
   
Minimum/Maximum (gpm) 30/70 30/70
Physical    
Weight (lbs) 268 328
Size (lengthxwidthxheight) 34″ x 34″ x 44″ 34″ x 34″ x 44″

HeatWave SuperQuiet – SQ120R – SQ166R

The NEWLY redesigned HeatWave SuperQuiet® SQ120R and the  SQ166R come equipped with all standard features. The Patented ThermoLink®Titanium Heat Exchanger at its core makes this unit a powerhouse that’s built to last. The SQ120R features IceBreaker®technology which allows you to heat and cool your pool. Plus, IceBreaker® units extend the swimming season longer than any other heat pump by continuing to operate in low temperatures.

  • Corrosion proof cabinet with AquaTop
  • Scroll Compressor – for quiet operation
  • Microprocessor Controls
  • Off-Set Plumbing

 

The only heat pump that allows you to maximize the potential savings of a variable speed pump is an AquaCal®, which utilizes our patented ThermoLink® Heat Exchanger technology with its unique flow characteristics.

• Patented hydraulic design adds only 1 PSI at 30 GPM, increasing compatibility with two-speed & variable speed pumps.
• Saves money when using a variable speed pump by reducing the RPM needed to achieve the same flow rate.
• Save money in a single speed pump application by reducing the run time needed to achieve the same turnover rate of the pool.

Corrosion Proof Cabinet  

• Louvred side panels protect evaporator coil while ensuring efficient airflow
• Rust and fade proof
• Impact resistant
• Built-in drain pan provides condensate management

AquaTop

• Air Flow Vectoring Top protects internal components from weather and debris while ensuring optimal air flow

Microprocessor Controlled  with Digital Display

• Flip-out control panel is out of sight, protected against sun and weather
• Lockable panel provides security from others changing the temperature
• Accurate and easy-to-read bright blue display
• On-board self diagnostics
• Microprocessor controlled defrost cycle

ThermoLink®  Titanium Heat Exchanger

• Patented counter-flow water management system
• Patented hydraulic design adds only 1 PSI at 30 gpm, increasing compatibility with two-speed & variable speed pumps
• Impervious to chemical corrosion
• Durability without sacrificing performance
• Lifetime warranty

Additional Feature

IceBreaker® Technology:Heat & Cool Models

• Extends swimming season longer than any other heat pump on the market
• Continue to heat at freezing temperatures to minimize heat loss
• Cool your pool to a refreshing temperature
• Set to heat, cool or autotemp

 

certifications